Select a CNC control type:

Allen-Bradley 9/Series Cincinnati 850 Cincinnati 850SX Cincinnati 900 Dynapath 10 Fadal Fanuc 0i-M/0i-T Fanuc 0M/0T Fanuc 10M/10T Fanuc 11M/11T Fanuc 15M/15T Fanuc 16/18/21/16i/18i/21i/30i/31i/32i Fanuc 16i/18i/21i Ethernet Fanuc 3M/3T Fanuc 6Ma/6Ta Fanuc 6Mb/6Mc/6Tb/6Tc Haas Mazak Fusion/Nexus Mazak M2 Mazak M32 Mazak M-plus Mazak T2 Mazak T32 Mazak T-plus Mitsubishi Meldas Okuma OSP-5000 Okuma OSP-5000 (Green Screen) Okuma OSP-700/OSP-7000 Siemens 840c Yasnac I80 Yasnac MX1/LX1 Yasnac MX2/LX2 and MX3/LX3

CNC Parameters

On the communication setting page you will set: Port (probably B) Device type should be set to "Generic Level 2" Baud 9600 Level_2 protocol Even parity 1 stop bit 7 data bits 15 second timeout Set the remaining parameters as follows: N/A Yes Yes No No Yes No

PC Settings

Leader: <18><10> Trailer: %<04><20>

IO Command Settings for PC-DNC plus Users

Additional Notes